TX-Planet Commercial Battery Storage | 261kWh C&I BESS

C&I Energy Storage

125kW / 261kWh C&I Storage Cabinet

C&I PV+Storage Integrated Unit

250kW/522kWh PV+Storage Split Unit

Core Product Advantages

Safety

Millisecond-level interlock protection, online insulation monitoring

Smart three-level fire alarm, system-level explosion-proof design, PACK-level detection & suppression

Full-time thermal runaway warning

Cost-Effectiveness

Long-life LFP batteries with high-precision SOX algorithm for higher ROI

Low auxiliary consumption, overall efficiency up to 88%

Intelligent liquid cooling controls cell difference within ±1.5°C for better consistency

Reliability

AI-based predictive maintenance forecasts faults, reducing unplanned downtime 90%

Remote fault diagnosis & software upgrade, 90%+ issues resolved online

Modular design shortens component replacement time, greatly boosting maintenance efficiency

Technical Specifications

	Model	JAP-ES-125kW-261kWh
DC Side	Rated Energy	261kWh
	Cell Capacity	314Ah LFP
	Rated Voltage	832Vdc
	Voltage Range	728–936Vdc
	Charge/Discharge Rate	0.5P
	Depth of Discharge	95%
	Rated Power	125kW
AC Side	Rated Voltage	380/400Vac，±15%（3P4W+PE）
	Rated Frequency	50/60Hz
	Power Factor	1.0 leading ~1.0 lagging
System Parameters	Dimensions (W×D×H)	989×1465×2473mm
	Battery Cycle Life	8000+
	Weight	2700kg
	Operating Temperature Range	-30°C～+50°C
	Operating Humidity Range	0~95% (non-condensing)
	Cooling System	Liquid Cooling
	Fire Suppression System	Pack-level + Rack cluster-level + water suppression
	Protection Rating	IP55
	Anti-Corrosion Rating	C4
	Communication Interface	Ethernet，RS485
	Communication Protocol	MODBUS-TCP
	Max Parallel Units	20
	Certification	GB/T 36276-2023

Download

Core Product Advantages

High Safety

Cell-to-System full-view hardware & software safety design

Dual-channel redundant ventilation meeting NFPA 69 fire safety

UL 9540A tested for higher-level system safety

High Performance

Off-grid 160% overload for 200ms

Long-life cells with 8000+ cycles

Supports 2× rated PV input to maximize solar utilization

Modular design with multi-power/multi-energy configurations for diverse needs

High Reliability

IoT, data models and domain expertise enable full monitoring, diagnosis, warning & health management

Early anomaly detection, fault warning and traceability shift O&M from reactive to predictive

3S coordinated safety control with proactive warnings and system linkage

Technical Specifications

Product Model	JAP-BS-0.5CP-104kWh-B01	JAP-BS-0.5CP-156kWh-B01	JAP-BS-0.5CP-208kWh-B01	JAP-BS-0.5CP-261kWh-B01
Rated Capacity	314Ah
Rated Energy	104.499kWh	156.748KWh	208.998kWh	261.248kWh
Nominal Voltage	332.8V	499.2V	665.6V	832V
Operating Voltage Range	291.2-374.4V	436.8-561.6V	582.4-748.8V	728~936V
Rated Charge/Discharge Rate	0.5CP
Depth of Discharge	95%
Protection Rating	IP55
Anti-Corrosion Rating	C4-M
Operating Humidity Range	0~95%
Operating Temperature Range	-25~+55℃
Max Operating Altitude	3000m
Communication	CAN, ModBus, MQTT
Cooling Method	Liquid Cooling
Fire Suppression Method	Heat/smoke sensing + combustible gas detection + aerosol
Dimensions (W×D×H)	1000x2150x1500 (±20mm)
Weight	≈1545kg	≈1880kg	≈2215kg	≈2550kg
Certification Standards	UN38.3，IEC 62619，IEC 61000，IEC 62040-1，IEC 62477-1:2012，IEC 62933-5-2，NFPA 69，UL 9540A

Note：Batterycabinet energy to inverter power ratio at least2:1

Rated Power	75kW	80kW	99.9kW	100kW	125kW
DC Input (PV Side)
Recommended Max PV Module Power	150kW	160kW	200kW	200kW	250kW
Max Input Voltage	1000V
Rated Input Voltage	600V
Startup Voltage	180V
MPPT Voltage Range	150~950V
Max Input Current	10×42A
Max Input Short-Circuit Current	10×60A
MPPT Count / Max Input Strings	10/20
Battery
Battery Voltage Range	300~950V
Max Charge/Discharge Current	200A/100A+100A
Max Charge/Discharge Current	2
Max Charge/Discharge Current per Port	100A
Communication Method	CAN/RS485
Grid Side
Rated Output Power	75kW	80kW	99.9kW	100kW	125kW
Max Output Apparent Power	75kVA	80kVA	99.9kVA	100kVA	125kVA
Rated Grid Voltage	3/N/PE, 220V/380V, 230V/400V
Rated Grid Frequency	50Hz/60Hz
Rated Grid Output Current	114A/108.3A	121.6A/115.5A	151.8A/144.2A	151.9A/144.3A	180.4A/189.9A
Power Factor	>0.99 (0.8 leading...lagging)
Total Current Harmonic Distortion	<3%, linear load
Max Input Current	250A
Off-Grid Side
Rated Output Power	75kW	80kW	99.9kW	100kW	125kW
Max Output Apparent Power	1.6× rated power; 200ms continuous output 2× rated power				10s continuous 1.4× rated power; 200ms continuous 1.6× rated power
On/Off-Grid Switching Time	< 10 ms
Rated Output Voltage	3/N/PE, 220V/380V, 230V/400V
Rated Frequency	50Hz/60Hz
Total Voltage Harmonic Distortion	< 2%，linear load
Efficiency
Efficiency	97.60%
European Efficiency	97.20%
General Parameters
Max Allowed Phase Imbalance	100%
Dimensions (W×D×H)	1174 x 814 x400mm
Weight	170kg
Parallel Unit Count	Grid: up to 10 units; Off-grid: 6 units standard (up to 10 with smart paralleling cabinet)
Topology	Transformerless
Operating Ambient Temperature	-25~+60°C
Anti-Corrosion Rating	C5
Protection Rating	IP66
Cooling Method	Intelligent Air Cooling
Max Operating Altitude	3000m
Grid Standards	G99，VDE-AR-N 4105/VDE V 0124，EN 50549-1&2/EN 50549-10, VDE 0126/UTE C 15/VFR:2019，NTS 631/RD 244/，CEI 0-21 etc.
Display	7“ LCDDisplay（region-dependent），Bluetooth + APP
Communication Method	CAN / RS485-115200 / Ethernet / Wi-Fi (optional) / Cellular (optional) / LAN (optional)

Download

Core Product Advantages

Safety

Safe & reliable with LFP cells balancing safety and long service life

Physical isolation between battery and electrical compartments blocks heat transfer

Flexible & Compatible

Supports multi-source input/output (PV / battery / diesel generator / grid / load)

Configurable operation modes for diverse application scenarios

Seamless on/off-grid switching (under 20ms)

Split design allows free combination, flexible and convenient

Smart & Efficient

Cloud connectivity for real-time system monitoring

All-in-one plug-and-play design for fast, efficient installation

Advanced BMS and comprehensive thermal management

Technical Specifications

	Model	JAP-HS-0250kW-0300kWp-0522kWh
DC Side	Cell Type	3.2V/314Ah，LFP
	Rated Voltage	832V，P260S
	Rated Energy	522kWh
	Operating Voltage Range	728~936V
	Max Charge/Discharge Rate	0.5P
	Protection Rating	IP55
	Anti-Corrosion Rating	C4-M
	Operating Humidity Range	0~95%
	Operating Temperature Range	-25~+55°C
	Max Operating Altitude	3000m
	Communication	CAN、ModBus、MQTT
	Cooling Method	Liquid Cooling
	Fire Suppression Method	Heat/smoke sensing + combustible gas detection + aerosol
	Single Cabinet Dimensions (W×H×D)	1000×2150×1500（±20mm）
	Single Cabinet Weight	~2550kg
	Certification	UN38.3，IEC 62619，IEC 61000，IEC 62040-1，IEC 62477-1:2012，IEC 62933-5-2，NFPA 69，UL 9540A
AC Side	Rated Power	250kW
	Rated Voltage	400Vac
	Voltage Range	320~460Vac
	Rated Current	361A
	Rated Frequency	50/60Hz
	THDi (Grid-Connected)	＜3%
	THDu (Off-Grid)	≤1% linear; ≤5% non-linear
	Power Factor	1.0 leading to 1.0 lagging
	Overload Capability	110% continuous
	AC Output	3W+N+PE
	Isolation Transformer	Yes
	On/Off-Grid Switching	Supported (20ms)
PV Side	Max PV Input Voltage	1000Vdc
	Max PV Power	330/412.5kWp
	MPPT Module Count	4/5
	MPPT Operating Voltage Range	250~950Vdc
General Parameters	Operating Temperature	0~+45℃
	Ambient Humidity	0~95% (non-condensing)
	IP Rating	IP54
	Anti-Corrosion Rating	C4-M
	Noise	<75dB
	Altitude	3000m
	Cooling System	Air Cooling
	Dimensions (W×H×D)	2735×1370×2385mm
	Weight	≤3280kg
	Communication	RS485，TCP/IP